Nexus 21 XM User Manual

1
2
3
4
5
6
Remote  
How to receive XM through your car stereo  
Whats in the box?  
Setup: In Car  
Vehicle Installation Guidelines for XM Satellite Radio  
How to use the vent mount  
NeXus™ Car Kit YA-CP200  
Choose the best way to mount your car cradle.  
This XM Receiver offers the listener a variety of options for connecting XM Satellite  
Radio to your vehicle’s FM radio. XM research and lab test results show that using a  
vehicle cassette adapter can best maximize the relationship between the best sound  
quality and ease of installation. If your vehicle kit does not include a cassette adapter,  
Radio.”  
To install the vent mount, find a horizontal vent that is strong enough to hold your NeXus  
and its car cradle.  
How to use the swivel mount  
Once you have mounted the radio, installed  
the antenna, and plugged in the power  
adapter you are ready to plug in all of the  
connectors. The line out may be used for an  
optional cassette adapter or direct adapter if  
FM reception is not good in your area.  
Mode – “Live XM” or  
“My Music” (recorded  
content)  
Power button  
antenna  
To install the swivel mount, first find a suitable location. The swivel mount’s adhesive is very  
strong and may be difficult to remove. Do not install this mount on leather surfaces and make  
sure the air temperature is at least 60°F.  
pow  
er  
line out  
power  
mod  
e
Left arrow button –  
1.  
To insert the vent  
mount, push it into  
the vent as shown.  
Pressing the left arrow button  
also allows you to “back out”  
of any menu you have selected  
car install guide  
vol  
-
vol  
+
rec  
ord  
Clean the mounting surface with the  
surface preparation kit. Peel away the  
adhesive liner.  
1.  
pa  
use  
/m  
ute  
p
ow  
er  
bo  
okm  
ark  
fav  
ori  
tes  
1
4
XM button – Access  
menus and confirm selec-  
tions  
2
3
mode  
5
6
7
8
9
0
car cradle with  
FM modulation  
remote  
car  
antenna  
power  
adapter  
cassette  
adapter  
mounts  
cleaning kit  
Volume  
Arrow buttons –  
menu entries, change  
channels, and more  
To remove the vent mount,push it into the vent and lift upwards slightly to release the  
mount’s hooks from the vent vane.  
1. Insert XM Mini-Tuner and NeXus player into the  
car dock.  
v
o
l -  
Peel off adhesive liner.  
v
ol +  
Record – Press and release to  
start recording a song, or to  
stop recording. Press and hold  
to start recording a channel. If  
you’re already recording a  
channel, pressing and holding  
this button ends recording after  
the current song.  
re  
co  
NeXus + Car Cradle + Antenna = Live XM  
r
d
2.  
Turn your NeXus player on.  
p
a
us  
e/m  
ut  
e
b
ook  
mar  
k
Listen to live XM*, recorded XM*, and WMA/MP3 files  
fa  
vo  
r
i
t
es  
3. Turn on your car stereo. Look for a channel that  
sounds like it is receiving a weak or no station.  
(88.1 - 107.9)  
Pause/mute – Pause  
playback or mute Live XM  
1. Cassette Adapter  
1
4
7
2
To listen in your car or at home; you only  
have to carry your NeXus* player and the  
XM Mini-Tuner* between these installa-  
tions.  
3
Using a cassette adapter for audio is the most popular and best sounding solution.  
Please follow steps 1 through 4 below for mounting the satellite radio antenna and  
securing the XM receiver and cables.  
5
6
Firmly press the swivel mount to the  
surface for 30 seconds. Allow 24  
hours before using the mount.  
2.  
8
4. On your NeXus player press the XM button. Scroll  
down to “Settings”; choose “FM Frequency.” You  
may be in either “Live XM” or “My Music” modes.  
(You will not hear any music in the “My Music” mode  
unless you have recorded content or MP3s.)  
9
Favorites – Go to  
favorite channels  
Bookmark – Tag interesting  
songs or tracks  
0
or  
2. Wired FM (Professional Installation Recommended)  
A wired FM installation kit is available from your retailer for professional installation.  
See your retailer for details. This solution is recommended if you cannot get  
acceptable performance with the wireless FM modulator.  
You can adjust the  
tension of the mount  
with a screwdriver.  
Numeric keypad – Select  
XM channels by channel number  
5. Follow the on screen instructions to choose the  
same frequency as you chose on your car stereo.  
You should now be able to hear XM through your  
car stereo.  
2.  
Attach the car cradle to either mount by  
sliding it into place.  
Either orientation may be used.  
3. Wireless FM Modulator  
*Hardware and required monthly subscription sold separately. Recorded music not for use in commercial establishments. Installation cost and other fees and taxes,  
including a one-time activation fee may apply. Subscription fee is consumer only. XM products, programming, services, and fees are subject to change, at any time,  
without notice. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XM-RADIO.  
Subscriptions subject to Customer Agreement available at xmradio.com. XM service only available in the 48 contiguous United States. ©2006 XM Satellite Radio Inc.  
All rights reserved.  
XM Satellite Radio Digital Audio Player  
The XM receiver is equipped with a FM modulator which can transmit the XM audio  
to your car’s FM radio without wires.  
If you need to remove the mount, carefully lift the adhesive pad with your fingers or a  
spoon. Warming with a hair dryer for several minutes will help soften the adhesive.  
7
8
9
10  
11  
12  
13  
IMPORTANT: For best wireless FM Modulator performance, you must locate the  
satellite radio antenna in a location that is in close proximity to the vehicle’s FM  
antenna.  
Step 2:  
Step 3:  
Once you have plugged the power  
and antenna jacks in to the car  
cradle, use the included cable  
organizer as shown in figure 3 to  
improve the overall appearance of  
the installation.  
FCC INFORMATION:  
Warranty  
Fig 3  
5. The warranty is not applicable in cases other than defects in material and workmanship.The  
warranty does not cover the following:  
Be sure to locate your car cradle and receiver below the top of the dash in your  
vehicle to keep the product within easy reach while driving. Choosing a lower  
location in your installation should also make it easier to manage the cables and  
achieve a more desirable appearance when the installation is completed. A lower  
location for the receiver in the vehicle will ensure that the installation does not cause  
interference with other FM radios outside the vehicle.  
Please note that the cables and antenna wire that has been supplied with your device  
are supplied with permanently attached ferrite beads. It is the responsibility of the user  
to use the cable and antenna wire with the ferrite beads.  
Samsung warrants MP3 players to be free of defects in material and workmanship for a period  
of twelve (12) months from the original date of purchase by the consumer. If during the  
period of warranty this product proves defective under normal use and service, you should  
return the product to the retailer from whom it was originally purchased, or to any Samsung  
Authorized Dealer or Authorized Service Center, if outside the time limit for returns imposed  
by the retailer. The liability of Samsung and its appointed maintenance company is limited to  
the cost of repair and/or replacement of the unit under warranty.  
a. Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear.  
For example, with reference to Figure 1, if your FM antenna is located on a rear  
fender or top of the roof, mount the XM antenna near the rear window location  
(option 1). If your FM antenna is located on a front fender, mount the XM antenna  
near the windshield location (option 2). Remember, the closer the satellite radio  
antenna can be to the FM antenna, the better the wireless FM reception and sound  
quality will be.  
The user is cautioned that changes or modifications not expressly approved by XM  
Satellite Radio, Inc. can void the user’s authority to operate this device.  
b. Abuse or misuse, including but not solely limited to the failure to use this product for its  
normal purpose in accordance with Samsung’s instructions for usage and maintenance.  
See illustration below (Fig 2) and be sure to locate your car cradle within the shaded  
area.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
c. Use of the product in conjunction with accessories not approved by Samsung for use with  
this product.  
Step 4:  
For further information relating to the Authorized Service Centers, contact 1-800-  
SAMSUNG (1-800-726-7864).  
Re-use the cable twist ties that were  
provided with the power adaptor  
and car antenna cables and always  
be sure to gather, bundle, twist tie,  
and secure any excess cable  
remaining after determining the best  
location for your satellite radio  
installation.  
Keep excess cable  
behind or under the  
dashboard  
d. Failure of or damage to the product arising from incorrect installation or use inconsistent  
with technical or safety standards, or failure to comply with product manual instructions.  
In order to optimize the operation of the wireless FM modulator, follow the  
installation guidelines outlined in steps 1 through 4 below:  
Fig 1  
Warranty Conditions  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation.  
e. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation or any  
cause beyond the control of Samsung.  
For best FM Modulator performance, you must locate the satellite radio antenna  
in a location that is in close proximity to the vehicle’s FM antenna.  
Step 1:  
1. The warranty is only valid upon presentation of the proof of purchase consisting of  
original invoice or sales slip confirmation, indicating the date of purchase, retailer’s name,  
model, serial number and product number. Samsung reserves the right to refuse warranty  
service if this information has been removed or changed after the original purchase of the  
product from the retailer.  
First, determine the proper location for your satellite radio antenna based on the  
following criteria for your specific vehicle:  
f. Unauthorized modifications carried out for the product to comply with local or national  
technical standards in countries for which the Samsung product was not originally  
designed.  
This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Avoid kinking, crimping, twisting or chafing the cable. Use pre-existing wire  
channels when possible.  
For example, secure the excess cable up under your dash board, between the seat  
and the console, or on the floor under a seat or floor mat. This will help to prevent  
the excess cable from interfering with the everyday use of your vehicle, improve  
the appearance of the installation, and avoid any undesirable accidental damage  
to the cables that might result in loss of power or satellite signal.  
You must locate the satellite radio antenna on the top of the roof either in front  
of the rear window (option 1) or behind the windshield (option 2). The satellite  
radio antenna will perform best if magnetically attached to a steel surface with  
an unobstructed view of the open sky and minimum of 3 to 6 inches of metal  
surrounding the antenna.  
For option 1 and rear mounting locations, route the cable into the trunk as  
shown. Always cross the weather seal at the lowest part of the trunk to reduce  
water leaks. From the trunk, route the cable into the passenger compartment  
through available wire channels and then along the floor under the door jam  
trim or under the carpet to the front of the passenger compartment. Do not  
leave the cable loose in the passenger compartment where it is likely to be  
damaged.  
2. Samsung’s sole obligations are to the repair of the defective part, or at its discretion,  
replacement of the product (service exchange unit).  
g. Repairs performed by non-authorized service centers such as opening of the product by a  
non-authorized person.  
3. Warranty repairs must be carried out by an Authorized Samsung Dealer/Service Center.  
No reimbursement will be made for repairs carried out by non-Samsung Centers, and  
warranty coverage will not be valid for any repairs or damage caused by such repairs.  
h. Products that have had model numbers, serial numbers, or product number on the product  
altered, deleted, removed or made illegible.  
- Reorient or relocate the receiving antenna.  
For wireless FM modulator installations, securing and tie wrapping the excess  
cable is important to reduce background hissing noise. Be sure to choose a  
location carefully by taking notice of how doors and trunks open and close, as well  
as how seats move when they are adjusted so you can be certain there is ample  
clearance provided for the cables.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
When routing the antenna cable along the windshield or rear window, tuck the  
antenna cable under the window seal to maintain a professional looking  
installation and to avoid loose wires on the exterior of the vehicle which are  
susceptible to damage. Follow the interior cable routing diagram depicted by  
dashed lines in Figure 1 where possible.  
6. This warranty does not affect the consumer’s statutory rights nor the consumer’s rights to  
return the product to the retailer under the retailer’s return policy.  
4. Repair or replacement under the terms of this warranty does not give right to extension  
to or a new starting of the period of warranty. Repair or direct replacement under the  
terms of this warranty may be fulfilled with functionally equivalent service exchange  
units.  
For option 2 and front mounting locations, route the cable along the door jam  
and into the vehicle as shown. Route the cable across the weather seal near the  
bottom of the door to reduce water leaks.  
- Consult the dealer or an experienced radio/TV technician for help.  
Fig 2  
6.30.06  
PMS 151 C  
PMS 116 C  

Pelco Camera Lens 13FF6D 4PAK User Manual
Pelco Camcorder CC3700H 2X User Manual
Panasonic Lumix Mirrorless Camera DMCGF3XT User Manual
Panasonic Hd Camcorder HX DC2 User Manual
Orion Car Audio Coaxial Speaker XTR602 User Manual
O'Brien SOLO POD 2101513 User Manual
Liz Claiborne Bluetooth Headset V1 User Manual
Listen Technologies LBB 4550 User Manual
KitchenAid Blender KSB755 User Manual
JVC LYT1196 001B User Manual